Canon LBP3360 - Page 271

8-34
Tr oubleshooting
8
Message List
<A4 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<A5 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<A7 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<D7 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<D8 LAYOUT ERROR>
Cause The page cannot be laid out because the memory has run out.
Remedy 1 Set [Graphics Mode] in UFR II Printer Driver to [Raster Mode], then print again.
(See Help of UFR II Printer Driver)
Remedy 2 After performing a soft reset using the RESET menu, perform a hard reset to
increase the free memory space or cycle the power of the printer, and then print
again. (Be aware that all the data in the memory that the printer has received
will be deleted.)
Remedy 3 Perform "Error Skip", then continue printing. However, the data with which an
error has occurred is not printed properly.