Adding Printer
Procedure for adding printer
to your Mac is explained.
To re-add a printer that was deleted, open System Preferences -> Printers & Scanners, click + next to the
printer list, and then perform the procedure described below.
If your printer is connected via USB, and you connect the USB cable to a Mac, the printer is automatically
added. The below procedure is not necessary in this case.
1. Check whether Default is selected in the displayed dialog
Note
• It may take a little time for your printer to appear.
2. Select the printer
Select the printer
listed as Bonjour Multifunction.
Note
• Check the following if printer does not appear.
Printer is on
Firewall function of the security software is off
In case of Wi-Fi connection: Printer is either connected to the wireless router or directly
connected to the PC (Direct Connection)
In case of wired LAN connection: Printer
is connected to the network device via LAN cable
3. Select Secure AirPrint from Use
4. Click Add
The printer is added to your Mac.
236
To Next Page
Loading...
