Canon MAXIFY GX6021 - Default Network Settings

Default Network Settings
LAN Connection Defaults
Item Default
Enable/disable Wired LAN Disable
Network name (SSID) BJNPSETUP
Wi-Fi security Disable
IP address (IPv4) Auto setup
IP address (IPv6) Auto setup
Set printer name* XXXXXXXXXXXX
Enable/disable IPv6 Enable
Enable/disable WSD Enable
Timeout settings 15 minutes
Enable/disable Bonjour Enable
Service name Canon GX6000 series
LPR protocol settings Enable
RAW protocol Enable
LLMNR Enable
Wi-Fi DRX settings Enable
Wired LAN DRX settings Enable
("XX" represents alphanumeric characters.)
* Default value depends on printer
. To check value, use operation panel.
LAN settings
Wireless Direct Defaults
Item Default
Network name (SSID) DIRECT-abXX-GX6000series *1
Password YYYYYYYYYY *2
Wi-Fi security WPA2-PSK (AES)
Connection request confirmation Displayed
36