Canon POD Deck Lite-C1 - Removing the Air Heater

3. Remove the connector for the Cassette Heater Assembly.
• 1 Connector
1x
4. Remove the Cassette Heater Assembly.
• 1 Screw
• 3 Points
Cassette Heater Unit
Bottom Plate
Points
1x
Removing the Air Heater
■ Preparation
1. Remove the Rear Cover.
“Removing the Rear Cover” on page 44
■ Procedure
1. Remove the Cable Cover.
• 1 Screw
1x
4. Disassembly/Assembly
61