1. Make certain brake pedal is depressed and
locked. If it is not, depress brake pedal and
pull lock lever to lock it.
2. Make sure cutting rotary clutch lever is in
[OFF] position.
5321M-0402-020E
Cutting Rotary
Clutch Lever
3. Make certain auxiliary transmission shift
lever is in [N (neutral)] position.
5321M-0402-030E
Auxiliary Transmission
Shift Lever
• Safety feature: engine cannot be started
unless brake pedal is depressed.
NOTE
• Safety feature: engine cannot be started
unless cutting rotary clutch lever is in [OFF]
position.
NOTE
5323M-0402-010E
Brake Lock Lever
Brake Pedal
• Do not use this machine in the altitude above 1500m (4920ft.) in its original
conguration. This machine cannot perform adequately above that altitude.
Using this machine under such conditions may result in an accident or cause
damage to machine. If you need to use this machine above that altitude, contact
your CANYCOM representative.
To Next Page
