• Drive lever returns to [ (neutral)] when
brake pedal is fully depressed.
NOTE
6. Insert ignition key into main switch.
7. Turn key to [ (start)] position to start
engine. Release key immediately after
engine starts. Key automatically returns to
[ (ON)] position.
8. Run engine without load for about 5 minutes
to warm up.
• Avoid frequent starting. Once engine starts,
run it for a while to charge battery.
• Drive machine gently in the rst week (40
to 50 hours) of operation after purchase for
breaking-in.
NOTE
5. Make sure throttle lever is in the [ (slow)]
position. In the cold weather below 10
degrees celsius when engine revolution is
not stable, position throttle lever 1/3 toward
the [ (fast)] position.
• This machine is eqipped with the autochoke
system and may start more easily with
throttle lever in the [ (slow)] position.
NOTE
To Next Page
Loading...
