CanyCom CMX222 - Page 46

-37-
Operation 4
5321M-0403-070E
Auxiliary Transmission
Shift Lever
Cutting Height
Adjust Lever
5321M-0403-020E
4. Move cutting height adjust lever to a desired
height.
3. Move auxiliary transmission shift lever to [L
(low speed)].
5321M-0403-080E
Cutting Rotary
Clutch Lever
5. Move rotary clutch lever to [ON] to start
cutting blade.
• Safety feature: engine stops automatically if
operator leaves seat while cutting blade is
rotating.
NOTE