Pressing the MEM key followed by the PRINT/ACCUM
key will print all of the IDs along with their stored
information
Pressing this key will prompt the user to enter an ID to
store. If Dout = 4 or 14, they will then be prompted to
store preset values for that ID
Pressing this key while weight is displayed on the
screen will cause that value to be stored as the Tare
weight (LOAD), switch to Net weight display mode and
turn on the UNLOAD annunciator.
Now, when the weight is removed from the scale, the
indicator will show the weight removed as a positive
number.
Pressing this key again will return to Gross weight
display mode and turn off the UNLOAD annunciator.
To Next Page
Loading...
Need help?
General
