EasyManua.ls Logo

Cardinal 2240 - Accumulator, Cont.; Manually Adding to the Accumulator; Weight Display; Push Button Tare

Cardinal 2240
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION WITHOUT ID, Cont.
Accumulator, Cont.
Manually Adding to the Accumulator.
1. With the display showing the current count (COUNT
annunciator ON), press the ++ key to add to (or the - key
to subtract from) the displayed count of the accumulator.
2. The ACCUM annunciator will flash to show that the
adjustment to the accumulator has taken place and will
continue to flash until all pieces are removed from
platform and the display returns to zero in preparation
for the next counting operation.
3. Press the ENTER key to complete the counting
operation and return to the Weight mode.
NOTE: Additional accumulator adjustments can
not take place until the next counting operation
has been completed.
Weight Display
Displaying Weight.
Press the ENTER key. The display will show the weight
on the scale platform. The GROSS and lb or kg
annunciator will illuminate to indicate which unit of
weight has been selected and that the scale is in the
Weight mode. Note, the count display will be blank.
Zero the Weight Display.
With the display in the Gross Weight mode (GROSS
annunciator illuminated), press the ZERO key. The
weight display will return to zero. The ZERO
annunciator will illuminate, indicating a center-of-zero
gross weight condition.
Push Button Tare
1. With the display in the Gross Weight mode (GROSS
annunciator illuminated and the Count display blank),
place the empty container on the scale platform.
2. Press the TARE key, then the ENTER key. The weight
display will change to zero and the NET annunciator
illuminates, indicating net weight is being displayed. The
empty container's weight has been entered as "tare
weight".
3. To return to a zero tare, simply remove all material from
the scale platform and press the TARE key, then the
ENTER key, which will reset the the tare weight to zero.
4. Press the NET/GROSS key, to return to the Gross
weight mode. Note, the selection of Gross weight mode
is indicated by illumination of the GROSS annunciator.
14
25
25
COUNT
ACCUM
I.I6I
GROSS
0.000
lb
lb
GROSS
ZERO
0.000
0.000
GROSS
0.I25
lb
0.000
TARE
0.000
NET
GROSS
0.000

Related product manuals