Cardinal 2240 - Components and Controls; AC Operation (Model 2240); AC Operation (Model 2241)

INSTALLATION, Cont.
AC Operation (Model 2240)
Plug the power cord into a grounded, polarized wall receptacle that supplies 110/120 VAC
50/60Hz power. If it is necessary to use an extension cord, make certain it is a 3-wire, fully
grounded type using a minimum of 18 gauge wire. Be certain the power cord is routed out of the
way of normal traffic. If only a ungrounded wall receptacle is available, it is the customer's
responsibility to contact a qualified electrician to replace the ungrounded receptacle with a
properly grounded polarized wall receptacle or have a grounding adapter properly installed.
CAUTION! To avoid electrical hazard, DO NOT under any circumstances, cut,
remove, alter, or in any way bypass the power cord grounding prong.
AC Operation (Model 2241)
It is the responsibility of the customer to contact a qualified electrician to install the proper
power cord connector. Plug the power cord into a grounded, polarized wall receptacle that
supplies 220/240 VAC 50/60Hz power. Be certain the power cord is routed out of the way of
normal traffic.
COMPONENTS and CONTROLS
Figure No. 2
4
Remote Scale
On/Off
Switch
Battery
Access
Locking Nut
Mounting Feet
Fuse
AC Power
Socket
Connector
Printer
Connector
Calibration
Sealing Screw
On/Off Switch
Weight Display
Count/Data Display
Battery Low and
Insufficient Sample
Annunciators
Quick
Count
Keys
Battery
Access
Commodity Tray