Cardinal 2240 - Deleting ID Numbers, Cont.; Selecting The ID Number; Verifying Active (Current) ID Number; Turning Off The Active (Current) ID Number

OPERATION USING ID(S), Cont.
Deleting ID Numbers, Cont.
3. If the current ID is to be deleted, key-in the displayed
number and press the ID key OR if another ID is to be
deleted, key-in that ID number and press the ID key.
4. The weight display will change to delid delid and the count
display will change to nono.
5. Press the YES/1 key to toggle the count display to yesyes,
then press the ENTER key to delete the ID.
6. The ID number entered and its associated accumulator
will be deleted. The ID annunciator will stop flashing
and remain off and the scale will return to the Weight
mode.
Selecting The ID Number
1. With the counting scale on, and in the Weight mode
(the Count display is blank), press the ID key.
2. The ID annunciator will flash, the weight display will
show id=id=, and the count display will show the current
active ID.
3. If the current ID is to be used, press the ENTER key
OR if another ID is to be used, using the numeric
keypad, key-in the desired identification number and
press the ENTER key.
NOTE: If the ID does not exist, the scale will
beep and return to the weight mode.
5. The ID annunciator will stop flashing and stay on, and
the scale will return to the Weight mode.
Verifying Active (Current) ID Number
1. With the counting scale on, and in the Weight mode
(the Count display is blank), press the ID key.
2. The ID annunciator will flash, the weight display will
show id= id=, and the count display will show the current
active ID.
3. Press the ENTER key. The ID annunciator will stop
flashing and stay on, and the scale will return to the
Weight mode.
Turning Off The Active (Current) ID Number
1. With the counting scale on, and in the Weight mode
(the Count display is blank), press the ID key.
2. The ID annunciator will flash, the weight display will
show id=id=, and the count display will show the current
active ID.
3. Press the CE key, then the ENTER key.
4. The ID annunciator will stop flashing and remain off
and the scale will return to the Weight mode.
17
ID
1 2 3 4 5
6 7 8 9 0
dEL id
no
dEL id
YES
0.000
id= I524
lb
0.000
lb
id= I524
1 2 3 4 5
6 7 8 9 0
ID
0.000
ID
0.000
ID
id= I524
ID
0.000
0.000
ID
id= I524
0.000
lb