24 Chapter 6 Recording Video and Capturing Images on a Computer
6 Press the review button on the camera to review the images.
OR
Use the image gallery toolbar to navigate, save, or delete the images (see“Image Gallery Toolbar”
on page 7).
7 Click to close the Acquisition interface.
The images are saved and displayed in the Patient history.
8 Remove and dispose of the protective sheath.
Note: The camera automatically goes into sleep mode when inserted into
the camera holder or left idle for 1.5 minutes. To use it again, pick it up or
press the Capture button.
Note: When the camera is idle for more than 3 hours(default), it powers
off. To change the default automatic power-off time, see “General
Preferences” on page 11.
To Next Page
Loading...
