28 Chapter 7 Capturing Images on a Monitor and Transferring Images to a Computer
3 Remove and dispose of the protective sheath when you have finished with the current patient.
Viewing Images
To review images stored in the camera, follow these steps:
1 Press the Capture button to access the review mode.
2 Press the review button to review one by one all the stored images.
3 Press the Capture button again to return to the live video mode.
Note: The camera automatically goes into sleep mode when inserted into
the camera holder or left idle for 1.5 minutes. To use it again, pick it up or
press the Capture button.
Note: When the camera is idle for more than 3 hours(default), it powers
off. To change the default automatic power-off time, see “General
Preferences” on page 11.
To Next Page
Loading...
