Figure 101 Detector Status Engine Selection
Select the required engine from the list.
Figure 102 Detector Status Detector Selection
Select the required detector from the list
Figure 103 Detector Status
The status screen shows:
The engine and detector being examined
Peak level Shows the highest level recoded for that detector since the peak value was
reset.
Dev. alarm level Shows the deviation alarm level set for that detector.
Isolation Indicated if the detector is currently isolated.
Comms. Indicated if the detector currently has a communications fault.
3.7.3 Detector Faults
Indicates and fault present on a selected detector.
Select 3. Detector Faults