Figure 98 Events Log from Time and Date
Additional events held in the log can be displayed using the up and down cursor keys.
3.6.4 Download to PC
With Engineer Level access an additional menu option is available allowing the Event Log contents to be
downloaded to a PC.
Downloading the Event Log requires software to be installed on the PC and a connecting cable between
the Control Panel and PC. See Appendix 3 for further details.
3.7 DETECTOR STATUS USER
In addition to information relating to the engine status, section 3.4, detector status information can also
be displayed for the individual detectors.
Select 2. Detector in the System Status Menu, Figure 79
Figure 99 Detector Status Menu
3.7.1 Detector Level
Displays the real time oil mist levels in mg/l for each detector on a specified engine.
Select 1. Detector Level and select the required engine from the list.
Figure 100 Detector Levels
3.7.2 Detector Status
Displays the current status of a specified detector.
Select 2. Detector Status
To Next Page
Loading...
