Carrier GRAVINER Mk 6 - 3.8 Engineers Access

Nov-21 Page 75 of 132 59812-K001 Rev 10
Figure 104 Detector Faults Engine Selection
Select the required engine from the list
Figure 105 Detector Faults Detector Selection
Select the required detector from the list
Figure 106 Detector Fault Status
The status screen shows:
The engine and detector being examined
Fan fault Indicates if the detector fan has failed.
LED fault Indicates if the detector sample chamber is contaminated with oil.
Detector CPU fault Indicated if a failure has occurred on detector microcontroller.
LED Failure Indicated if an LED illuminating the sample chamber has failed.
3.7.4 Detector Offsets
Detector offsets is a legacy option and should not be used, adding a detector offset will compromise the
calibration of the detector.
3.8 ENGINEERS ACCESS
While interrogation and testing of the system is available at the User access level changes to the system
configuration requires logging in to the Engineers access level, see section 3.2.2.
Figure 107 Main Menu Engineer Level
Configure System Allows the system configuration to be input, see section 3.9