6.8 OMD MK6 LOG READER
The OMD Mk6 Log Reader is a Windows© programme which allows the event log from the OMD Mk6
panel to be downloaded to a PC, examined and saved.
6.8.1 Requirements
PC running Windows
Download cable, MT0021, available from Carrier
USB to RS232 converter, if the PC does not have an integrated RS232 communications port (not
supplied)
OMD Log Reader software, P57972
6.8.2 Setup
Plug one end of the MT0021 Download cable into the PC Serial port, and the other end into the OMD
Panel Main Board, as shown below
Figure 164 Download Cable Connection
Copy the OMD Log Reader directory to the hard drive of the PC
Open the OMD Log Reader directory and double click on the setup file. Setup will install the OMD Log
Reader program on the PC hard drive. Note during the installation process it may be necessary to connect
to the internet to allow downloading to the Microsoft .NET framework if this is not already installed on
the PC.
From the Windows© Start menu run the OMD Log Reader program. This will open the window shown
below.
To Next Page
Loading...
