Carrier GRAVINER Mk 6 - 6.4 Spares Kits

Nov-21 Page 120 of 132 59812-K001 Rev 10
3. Identify the cable to be removed at the Junction Box, disconnect each wire from the terminals.
4. Unscrew the top of the gland to release the cable strain release.
5. To prevent damage to the cable gland cut the cable near the top of the gland and pull the cable
through the gland.
6. Discard the damaged cable.
7. Fit the replacement cable as detailed in 2.6.4
8. Connect the cable connector to the Detector
9. De-isolate the Detector
6.4 SPARES KITS
6.4.1 Commissioning Kit
Commissioning Kit D9221-026 consists of:
Description
Part No.
Qty
Category
Cleaning Wipes
1-A7311-001
2
Consumables
Smoke Test Oil -30 ml
1-D9221-028
1
Bottle
Consumables
Wick - 150 mm
1-17100-H06
3
Consumables
Smoke Tester
1-D9221-029
1
Tools
Materials Safety Data Sheet
-
2
Information
6.4.2 Service Kit
Service Kit D9221-027 consists of:
Description
Part No
Qty
Category
Fan Retainer
1-B3741-902
5
Spares
Compression Spring
1-B3721-006
5
Spares
Base Moulding Seal
1-C1513-802
5
Spares
Fan Connector Seal (1 Screw)
1-C1413-801
5
Spares
Fan Connector Seal (2 Screw)
1-35134-K037
5
Spares
M3 Screw
1-21833-H01
5
Spares
Glass Cleaner 250ml
1-A7311-002
1
Consumables
Foam Buds Pkts
1-B6910-217
2
Consumables
4mm Hexagon Key
1-B6910-219
2
Tools
Pulling Tool
1-D9131-002
1
Tools
Materials Safety Data Sheet
-
2
Information