CASE CONSTRUCTION CX37C - Operating controls

9-ACCESSORIES
Operatingcontrols
Theowrate/pressurecharacteristicoftheauxiliarycircuitcanbesetaccordingtothetypeandtothespecications
oftheattachmentused.
NOTICE:beforeoperatinganyhydraulicattachmentbesuretosettheproperattachmentmode(breakerorcrusher)
andtheproperhydraulicowrate/pressurecharacteristic.Iftheattachmentmodeorthehydraulicowrate/pressure
characteristicarenotproperlyset,malfunctionorfailuremayoccurtothemachineordamagemayoccurtothe
hydraulicattachment.
Tooperatethebreakerorclamshell,usetheauxiliary
pedal(A).
Whenbreakeroperatingisnished,stopengineandpush
theauxiliarypedal(A)toreleasepressureinthebreaker
circuit.
Ifpressurestillremains,thelifetimeofthediaphragmin
theaccumulatorwillbeshortened.
NOTE:makesuretopreventcontaminationbydust,sand
andetc.Contaminatedoilcauseswearanddamageto
themovingpartsofthepump.
NOTE:whenoperatingthebreaker,boltsandnutsofmain
equipmentmaybeloosenedbyvibration.So,itmustbe
inspectedperiodically.
NOTICE:Ifnotusinganyhydraulicattachment,donot
operatecontrolsforauxiliaryhydrauliccircuits.
SMIL16MEX1484BB3
9-3