DISTRIBUTION SYSTEMS - ELECTRICA L POWE R SYSTEM
Alternator - Replace (A.30.A.82 - F.10.A.30)
435, 445, 445CT
1. Use a suitable support between the front bearing
and the bearing retainer on the rotor shaft. P ress the
rotor shaft out of the front bearing and the spacer.
B8971426M 1
2. Remove the bearin g retainer.
B8971429M 2
3. Use a suitable support between the rear bearing
and the slip ring on the other end of the rotor shaft.
Press the rotor shaft out of the rear bearing.
B8971432M 3
1 04/05/2005
A.30.A / 87
To Next Page
Loading...
