Case 445 - Hydraulic Pump - Assemble (A.10.A.20 - F.10.A.20); 435, 445, 445 Ct

DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Hydraulic pump - Assemble (A.10.A.20 - F.10.A.20)
435, 445, 445CT
1. Lubricate and insert the bottom seal into the groove
of the body.
GD98J814 1
2. Lubricate and insert the top seal into the groove of
the body.
NOTE: The top seal will be placed on top of the bottom
seal.
GD98J813 2
3. Lubricate and insert a new seal ring into the groove
of the body.
GD98J812_2 3
1 04/05/2005
A.10.A / 41