Case 445 - Reservoir - Apply Vacuum (A.10.A.22 - F.35.A.50); 435, 445, 445 Ct

DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Reservoir - A pply vacuum (A.10.A.22 - F.35.A.50)
435, 445, 445CT
1. Remove the cap from the hydraulic reservoir.
2. Install an adapter cap on the filler neck. CAS1871
3. Connect the vacuum pump to the adapter.
CAS10192
4. Start the vacuum pump.
1 04/05/2005
A.10.A / 53