145
VIEWING SNAPSHOTS AND MOVIES
IMPORTANT!
• All button operations are disabled while the slideshow is
switching from one image to another. Wait until an image is
stopped on the display before performing a button
operation. If a button does not work, wait a bit and try
again.
NOT
• Selecting a movie when “One Image” is selected for
“Images” and then selecting a movie for the slideshow will
cause the movie to play back repeatedly within the time
specified by the slideshow “Time” setting.
• In image copied from a computer or an image recorded
with a different type of digital camera may remain on the
screen longer than the time specified by “Interval”.
■ Playing a Slideshow on the USB Cradle
(Photo Stand)
You can play a slideshow on the camera while it is mounted on
the USB cradle. This is a good way to enjoy a long slideshow,
without worrying about the camera’s battery going dead.
• Configure slideshow settings (page 143) before performing
the steps below.
• Connect the bundled AC adaptor to the USB cradle, and plug
it into a power outlet.
1. Turn on the camera and place it onto the USB
cradle.
To Next Page
Loading...
Need help?
General
