146
VIEWING SNAPSHOTS AND MOVIES
2. Press the USB cradle’s
[PHOTO] button to
start the slideshow.
The slideshow is performed in
accordance with the settings
you configured with the
procedure on page 143. The
camera will turn off
automatically after the time
you specified with the “Time” setting elapses.
• You can change the slideshow setting by pressing
[MENU] while a slideshow is in progress. After
configuring the settings, press [MENU] again to restart
the slideshow.
• To adjust the level of audio volume during a slideshow,
use [S] and [T] to adjust the volume.
To stop a slideshow
Press the USB cradle’s [PHOTO] button. This will turn off the
camera.
IMPORTANT!
• The battery does not charge while a slideshow is in
progress. To charge the battery, stop the slideshow.
NOT
• You can connect the USB cradle to a TV and enjoy the
slideshow on a big screen. You can also connect to a video
recording device and record a slideshow (page 147).
[PHOTO]
To Next Page
Loading...
Need help?
General
