210
USING THE CAMERA WITH A COMPUTER
■ Installing the USB Driver (Windows 98SE
and 98 Only)
The following operation shows how to install the USB driver on a
computer running Windows 98. The procedure for Windows
98SE is slightly different, but the general flow is the same.
1. Set the bundled CD-ROM into the CD-ROM
drive of your computer.
• Use the CD-ROM that has “USB driver” on its label.
• This will display the menu screen.
2. On the menu screen, click the “English” tab.
• You could also click another language tab, if you prefer.
3. Click “Install” for “USB driver B” to start
installation.
4. Follow the instructions that appear on the
dialog box and click “Next”.
Do not try to establish a connection between the camera
and computer before installing the USB driver on the
computer.
If you do, the computer will not be able to recognize the
camera.
If your computer is running Windows 98SE or 98, be sure to
install the USB driver.
Do not connect the camera to your computer without installing
the USB driver first.
To Next Page
Loading...
Need help?
General
