110
USING BEST SHOT
NOT
• When the camera is at an angle to the photograph you are
recording, the shape of the photograph may appear
distorted in the recorded image. Auto keystone correction
corrects for this distortion, which means that a photograph
appears normal even if you record it at an angle.
■ Selecting the Old Photo Scene
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the “Old
Photo” scene and then press [SET].
“Old Photo” will remain selected until you select a different
BEST SHOT scene.
■ Recording an Image with Old Photo
1. Press the shutter
button to shoot the
image.
• This displays a photograph
contour confirmation
screen and then saves the
original recorded image.
An error message will appear (page 257), without
displaying the photograph contour confirmation screen, if
the camera is unable to find the contour of the
photograph.
2. Use [W] and [X] to select the candidate you
want to correct.
3. Use [S] and [T] to select “Trim” and then
press [SET].
This displays a cropping boundary on the monitor screen.
• To cancel the correction operation, select “Cancel”.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
