149
VIEWING SNAPSHOTS AND MOVIES
Images
(Select the
files you
want to
include in
the
slideshow.)
• All images: Includes all snapshots, movies,
and audio in memory.
• Only: Includes snapshots and audio
snapshots only.
• Only: Includes movies only.
• One Image: Includes only one specific
image (selected using [W] and [X]).
• Favorites: Includes snapshots in the
FAVORITE folder (page 183).
Time
(Specify the
time of the
slideshow,
from start to
finish.)
Use [W] and [X] to select one of the following
times (in minutes): 1, 2, 3, 4, 5, 10, 15, 30, 60.
Interval
(Select the
interval
between
slides.)
Use [W] and [X] to select a value from 1 to 30
seconds, or “MAX”.
–If you specify a value from 1 to 30
seconds, images change at the specified
interval, but the audio portion of movies
and audio snapshots will continue to play
until the end, regardless of the interval
setting.
– When “MAX” is selected, only the first
frame of each movie is displayed, without
any playback of the audio.
Effect
(Select a
special
effect.)
Use [S] and [T] to select the effect you want.
• Pattern 1, 2, 3, 4, 5: Plays background
music and applies an image change effect.
– Pattern 1 through 4 use the same special
effects but each use different background
music. Pattern 5 uses different effects
from patterns 1 through 4.
– Selecting “Pattern 5” changes the
“Images” setting to “ Only” and
disables the “Interval” setting.
• Off: No background music plays and no
image change effect is performed.
The current effect setting is disabled
automatically in following cases.
– When the “Images” setting is “ Only”,
“One Image”, or “Favorites”.
– When the “Interval” setting is “MAX”, one
second, or two seconds.
– When the slideshows changes to or from
a movie file or a voice recording file.
B
To Next Page
Loading...
Need help?
General
Weight and Dimensions
