8-19
Menu
Function: Creates a branching menu in a program.
Syntax: Menu "<string (menu name)>", "<string (branch name) 1>", <value or variable 1>,
"<string (branch name) 2>" ,<value or variable 2>, ... , "<string (branch name)
n >", <value or
variable n >
Parameters: value (0 to 9), variable (A to Z,
r ,
θ
)
Description:
• Each "<string (branch name)
n >" ,<value or variable n > part is a branch set, and the entire
branch set must be included.
• From two to nine branching sets can be included. An error occurs when there is only one or
more than nine branching sets.
• Selecting a branch on the menu while the program is running jumps to the same type of label
(Lbl
n ) as the one used in combination with the Goto command. Specifying “"OK", 3” for the
“"<string (branch name) n >", <value or variable n >” part specifies a jump to Lbl 3.
Example: Lbl 2 _
Menu "IS IT DONE?", "OK", 1, "EXIT", 2 _
Lbl 1 _
"IT’S DONE !"
k Clear Commands (CLEAR)
ClrGraph
Function: This command clears the graph screen.
Syntax: ClrGraph
Description: This command clears the graph screen during program execution.
ClrList
Function: This command deletes list data.
Syntax: ClrList <list name>
ClrList
Parameters: list name: 1 to 26, Ans
Description: This command deletes the data in the list specified by “list name”. All list data is
deleted if nothing is specified for “list name”.
To Next Page
Loading...
Need help?
General
