Casio FX-CG10 User Manual

12-2
k Power Properties Settings
u To specify the Auto Power Off trigger time
While the initial System mode screen is displayed, press 2(PWRProp) to display the Power
Properties setting screen.
• 1(10Min) ... {10 minutes} (initial default setting)
• 2(60Min) ... {60 minutes}
Press J or !J(QUIT) to return to the initial System mode screen.
u To specify the backlight duration
1. While the initial System mode screen is displayed, press 2(PWRProp) to display the
Power Properties setting screen.
2. Use f and c to select “Backlight Duration”.
• 1(30Sec) ... {turns off the backlight 30 seconds after the last key operation is performed}
(initial default setting)
• 2(1Min) ... {turns off the backlight one minute after the last key operation is performed}
• 3(3Min) ... {turns off the backlight three minutes after the last key operation is performed}
3. Press J or !J(QUIT) to return to the initial System mode screen.

Casio FX-CG10 Specifications

General

Brand	Casio
Model	FX-CG10
Category	Calculator
Language	English