14-6
k Managing Geometry Mode Files
This section explains how to save Geometry mode data to files, and how to manage your
files.
u To create a new file
1. Perform the following operation: 1(File) – 1:New.
• The following dialog box will appear if you have a
drawing on the screen.
2. To clear the current drawing and create a new file, press 1(Yes).
• This will create a new file and display a blank drawing screen.
u To open an existing file
1. Perform the following operation: 1(File) – 2:Open.
• This displays a menu of existing files.
• Pressing 6(STRGMEM) here will display the storage memory file list where you can
open a g3p file. For details, see “Displaying a Geometry Mode Screen Background
Image” (page 14-8).
2. Use c and f to move the highlighting to the file you want to open and then press w.
• The following dialog box will appear if you have a
drawing on the screen.
3. To clear the current drawing, press 1(Yes).
• This will open the file you selected in step 2.
To Next Page
Loading...
Need help?
General
