E-105
Handling the Hand Belt
The optional hand belt can be attached to the tablet.
If you also plan to attach the neck strap, attach the neck strap fi rst (see E-106).
Attaching
1. Feed the ends of the 4 hand belt straps through the mounts on each corner of the
back of the tablet. Then fold the straps back over, adjust the length as appropriate and
fasten them in place using the Velcro fasteners.
Important!
Pulling on the hand belt with excessive force could cause damage.
Unclip the hand belt before opening the battery pack cover.
Velcro fastener
Release button
•
•
To Next Page
Loading...
General