E-106
Attaching the Neck Strap
The optional neck strap can be used to prevent the tablet from fall when carrying it
around. Four strap mounts are provided. Use whichever 2 mounts provide greatest ease
of use.
If you also plan to attach the hand belt (see E-105), attach the neck strap fi rst.
Attach the neck strap according to the procedure described below.
1. Press the neck strap release buttons and pull apart the buckles on each end of the
strap.
2. Feed the fi ne looped cords on each strap end through the corner strap mounts on the
back of the tablet and then feed the strap end buckle through the loop.
3. Fit the two ends of the main neck strap into the respective strap end buckles. Adjust
the length as necessary.
To Next Page
Loading...
General