E-46
Important!
Both contactless IC cards and RFID tags
The NFC employs a low power radio wave which does not require regulatory
station license.
Frequency band used by the NFC is 13.56 MHz. Secure a suffi cient space
between V-T500 and other reader/writer located in the vicinity. Make sure also
that a radio station employs the same frequency band does not locate near by
prior to using V-T500.
Read a contactless IC card or RFID tag by holding the tablet so that the reader
portion is fl ush against the card or tag.
When holding up the tablet, take care not to strike the reader portion against
the card or tag.
If the card or tag cannot be read, try moving the tablet back and forth or side to
side.
Contactless IC cards
Metal objects near a contactless IC card will interfere with successful reading.
Take the card out of a wallet if the wallet is with metal object before applying it
to the reader portion.
The card may not be read correctly if it is overlapped by one or more other
cards.
Always keep the tablet away from your body when reading cards. Avoid facing
the tablet towards your body while using it.
RFID tags
Metal objects near an RFID tag will interfere with successful reading. Move the
tag away from any nearby metal objects or use a tag designed for use with metal.
The tag may not be read correctly if it is overlapped by one or more other tags.
Set up the tablet so that tags can be kept completely apart during reading.
•
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
General