E-108
Using the Screen Cover as a Stand
1. Disengage the rubber bands from the tablet, open the cover and place it on a desktop
or other fl at surface.
2. Turn the tablet so that it faces forwards and fi t the bottom into the notch in the cover
to fi x it in place.
Notch
Important!
The screws cannot be removed from the screen cover.
The screen cover is a synthetic leather product, so any moisture on the cover
should be immediately be wiped off gently with a soft, dry cloth.
Note also that it is sensitive to heat and should not be used close to a fi re or
similar location.
Do not hold the tablet by the screen cover alone while the rubber bands are not
fastened around the tablet. Doing so could damage the screen cover.
When fi tting the tablet into the cradle, lift up the screen cover slightly so that the
tablet fi ts securely into the cradle.
•
•
•
•