Cassia E1000 Bluetooth Gateway
The E1000 increases the number of devices that can be paired and controlled for up to 40
Bluetooth low energy devices. In broadcast mode, the E1000 can listen to several hundred
Bluetooth low energy end devices. Its patented smart antenna is optimized for horizontal
use. The E1000 supports Ethernet, 2.4Ghz, and 5Ghz Wi-Fi, or USB cellular modem as an IP
uplink. This enables your Bluetooth low energy devices to be remotely accessible and
controllable remotely via an Internet application.
Processor & Memory
CPU: 4 core ARM Cortex-A5, up to 1.5GHz
256MB RAM DDR3, 4GB eMMC storage
Bluetooth
Bluetooth Low Energy chip: 2x Nordic nRF52832
Bluetooth Low Energy version: 4.0/4.1/4.2, 5 compliant
Connections: Up to 40 co-existing connections
Frequency: 2.400 to 2.483 GHz
Data rates: up to 2x1Mbps
Tx power: Configurable in 3~19dBm (limited by local regulatory requirements)
Rx sensitivity: -105dBm
Antenna Gain: 5dbi PEAK
For full features and specifications, please see the E1000 datasheet here:
https://www.cassianetworks.com/resources/e1000-bluetooth-edge-router/
1.4.
Cassia S2000
The Cassia S2000 enterprise Bluetooth gateway is designed for deployments in industrial
automation, health monitoring, senior safety, and other enterprise IoT applications. The
Cassia S2000 can be attached to a ceiling or wall with the included mounting kit, or it can be
placed on a desktop or counter space. The S2000 receives power from either a Micro-USB
adapter or a switch using PoE via the uplink Ethernet port.
Cassia S2000 Bluetooth Gateway
To Next Page
Loading...
