The following network parameters can be configured in batches
Network priority
Ethernet IP allocation method: can only be batch configured to DHCP
WIFI working mode
o In Client mode, the IP allocation method can only be batch configured to
DHCP
o Please don’t modify to Hotspot mode in batches. Otherwise, the Hotspot
SSID and password of all gateways will be the same
Add secondary WIFI: it will work as the backup WIFI SSID if the gateway failed to
connect to the first WIFI SSID
The cellular modem configuration needs to be configured on the local console of the
gateway. They can’t be configured in batches from AC.
To Next Page
Loading...
