Catler ES 910 - Advanced Coffee Machine es 910 Setting; Coffee Volume Adjustment (Italian Espresso); Restoring the Original Coffee Volume (Italian Espresso); Setting the Temperature of the Brewed Coffee

26
ADVANCED COFFEE MACHINE ES 910 SETTING
ADVANCED COFFEE MACHINE ES 910 SETTING
COFFEE VOLUME ADJUSTMENT ITALIAN ESPRESSO
1. Follow steps 1 to 7 in the section “Italian Espresso Preparation (1 cup and 2 cups)”.
2. Simultaneously press the and buttons.
3. The , and buttons will start to ash. The “SINGLE” indicator lamp will start to ash
(if you have selected 1 cup) or the “DOUBLE” indicator lamp will ash (if you have selected
2 cups).
4. The grinding time display shows “C1” (if you have selected 1 cup) or “C2” (if you have
selected 2 cups).
5. Coee preparation and dispensing starts.
6. When the desired amount of coee has owed into the cup, press the button to stop
the coee dispensing. This will store the new volume of coee dispensed in memory, and
when you brew again, the new stored amount of coee will ow into the cup.
The coee volume for 1 cup can be adjusted from 22 to 46 ml.
The coee volume for 2 cups can be adjusted from 45 to 90 ml.
Asmaller or larger volume is not possible. If you stop the volume of coee dispensed below
the lower limit (less than 22 ml for 1 cup and less than 45 ml for 2 cups), the memory will store
the minimum volume just given, i.e. 22 ml for 1 cup and 45 ml for 2 cups.
Once the maximum volume of coee dispensed (46 ml for 1 cup and 90 ml for 2 cups) has
owed into the cup, coee dispensing will automatically stop and this maximum volume will
be stored in the memory.
RESTORING THE ORIGINAL COFFEE VOLUME ITALIAN ESPRESSO
If you need to restore the original coee volume for Italian espresso, proceed as follows:
1. Press the button repeatedly the select “ITALIAN”.
2. Use the button to select “SINGLE” (1 cup) or “DOUBLE” (2 cups), depending on which
volume of coee you want to restore.
3. Press and hold the button until this button and the “SINGLE” indicator lamp (if you have
selected 1 cup) or the “DOUBLE” indicator lamp (if you have selected 2 cups) start to ash.
The grinding time display will show “r1” (recovered volume for 1 cup) or “r2” (recovered
volume for 2 cups).
SETTING THE TEMPERATURE OF THE BREWED COFFEE
You can set the temperature of the brewed coee between 88 and 96°C. Ahigher temperature
promotes the bitter taste of the coee but reduces the acidity, while alower temperature
reduces the bitter taste and promotes the acidity of the coee. To set the coee temperature,
proceed as follows:
1. Press the button repeatedly the select “ITALIAN”.
2. Press and hold the and buttons at the same time until the and buttons and the
“SINGLE”, “DOUBLE”, “AMERICANO”, “ITALIAN”, “PRESSURE HOT WATER” indicator lamps ash.
3. The grinding time display shows the default temperature setting.
4. Turn the grinding time control to adjust the temperature: