Catler ES 910 - Error Messages

35
TROUBLESHOOTING
Problem Meaning Solution
The coee machine does not
dispense steam.
The coee machine has not
yet warmed up suciently to
steam temperature.
Wait for the coee machine
to warm up.
The steam jet is clogged. Clean the steam jet.
ERROR MESSAGES
Error message Meaning Solution
E0 Abnormal communication
between the motherboard and
the display control board.
Contact an authorised service
centre.
E1 Fault in the temperature sensor of
the coee water heater
E2 Fault in the temperature sensor of
the steam water heater
E4 Fault on the owmeter sensor
P1 The coee bean hopper is not
inserted.
Insert the coee bean hopper.
P2 The engine stopped. Switch o the coee machine.
First clean the ground coee
dispensing, grinding stones
and grinding chamber. Remove
foreign objects.
If the problem persists, please
contact aservice centre.
The ground coee is too ne. Clean the grinder and set
acoarser grade of grinding.
P3 Disconnected the grinder engine
circuit
Contact an authorised service
centre.
P4 Protection against damage to the
grinder due to excessive load (too
long grinding time)
Let the coee machine cool for
about 6 minutes.