Catler ES 910 - Removing Lime Scale Deposits

31
CARE AND CLEANING
WARNING!
TAKE EXTRA CARE DURING CLEANING.
THE WATER DISPENSED IS VERY HOT AND
THERE IS ARISK OF SERIOUS BURNS IF HAN

DLED INCORRECTLY.
NOTE:
You can stop the cleaning process at any time by pressing the button.
REMOVING LIME SCALE DEPOSITS
The coee machine is equipped with adescaling alert system and its own descaling
programme, which can be easily started by the user.
The descaling alert will take place either after 2 to 3 months of operation, or after 300 cups
of coee prepared (the machine is equipped with its own counter), or after 15 litres of water
consumption. After asuccessful and complete descaling process, the counters are reset to
zero.
We recommend descaling when the coee machine alerts you to the need for descaling. At
the same time, it is possible to carry out the descaling without prior alert.
The “DIRT” indicator lamp will start to ash when descaling is necessary.
Descaling Agent
You can use one of the following descaling agents to descale the coee machine:
1. Tablet descaling agent designed for this type of coee machine (available in regular retail
network)
2. Liquid descaling agent designed for this type of coee machine (available in regular retail
network)
3. White vinegar and warm water
Preparation of Descaling Agent
1. Remove the water tank and empty its contents.
2. Amark is indicated on the tank to determine the volume during descaling.
3. Prepare the descaling solution. For tablet and liquid descaling agent, follow the
instructions of the manufacturer of the product. If you are going to use white vinegar,
pour 1.5 tablespoons of white vinegar into the tank and add water up to the descaling
mark.
4. Replace the tank into the coee machine and make sure it is properly inserted and the
water is not leaking anywhere.