Catler ES 910 - Outer Surface of the Coffee Machine; Cleaning the Internal System (CLEAN ME)

30
CARE AND CLEANING
WARNING!
THE WATER IN THE DRIP TRAY MAY BE
VERY HOT. BE CAREFUL WHEN HANDLING
AFULL DRIP TRAY. THERE IS ARISK OF SERI

OUS BURNS.
OUTER SURFACE OF THE COFFEE MACHINE
Regularly clean the outer surface of the coee machine, especially the wall behind the brew
head.
Wipe the outer surface of the coee machine with aslightly damp cloth and wipe dry with
aclean cloth.
CLEANING THE INTERNAL SYSTEM CLEAN ME
With regular daily use of the coee machine, we recommend cleaning the internal system
once every 14 days.
1. Fill the tank with at least 1 litre of water.
2. Empty the drip tray.
3. Place alarger bowl under the brew head and alarger mug under the steam jet.
4. Switch on the coee machine andallow it to preheat.
5. Press the
button repeatedly and select “CLEAN ME”. The indicator lamp lights up.
6. Press and hold the
button for approximately 2 seconds to start the cleaning process.
7. The grinding time display shows “c2”.
8. The coee machine starts and begins to dispense hot water through the brew head and
handle. The water will ow out for approximately 1 minute.
9. When hot water dispensing is complete, “c3” will appear on the grinding time display.
10. Press the button and the grinding time display will show “c4”.
11. The coee machine starts dispensing hot water from the hot water dispensing jet. The
water will ow out for approximately 1 minute.
12. When hot water dispensing is complete, “c5” will appear on the grinding time display.
13. Turn the steam/hot water dispensing control to .
14. The grinding time display shows “c6”.
15. The coee machine starts dispensing hot water through the steam jet. The water will ow
out for approximately 1 minute.
16. When hot water dispensing is complete, turn the steam/hot water dispensing control to
position 0.
17. When the steam jet cleaning is complete, the machine will return to the state where it is
ready to make coee.