Catler ES 910 - Page 33

33
CARE AND CLEANING
3. Remove the ground coee residue from the upper grinding stone, the lower grinding
stone and the grinding chamber with abrush.
4. Clean the ground coee dispensing hole with abrush.
5. Insert the coee bean hopper.
6. Press and hold the
button to start the grinder. Leave the grinder running until the
grinding chamber is empty.
7. Remove the coee bean hopper and, if necessary, wipe the grinding chamber and the
bottom grinding stone with abrush.
8. Replace the upper grinding stone.
9. Replace the coee bean hopper and replace the lid.
WARNING!
NO PART OF THE GRINDER OR THE COF

FEE BEAN HOPPER IS INTENDED FOR DIRECT
CONTACT WITH WATER. USE ONLY ASOFT
SPONGE SLIGHTLY DAMPENED IN WARM WA

TER FOR CLEANING.
NOTE:
Always empty the coee bean hopper before cleaning the grinder.
Storage
Before storing, make sure that the appliance is clean, dry and completely cooled down. Store
it in awell-ventilated dry place out of reach of children and animals.