Cavli Wireless C16QS - Control Interface; GNSS Interface

44
www.cavliwireless.com
C16QS Hardware Manual
3.15 Control Interface
Table 3-25 Control interface pin definition
STATUS:
This pin is used to get the status of the module.
FLIGHT_MODE:
This pin is used to disable RF transmission.
3.16 GNSS Interface
Multi – GNSS receiver:
✓ L1 multi-band GNSS receiver
✓ Multi-Constellation GPS/GLONASS/Galileo/Bei Dou/QZSS/NAVIC
✓ Support for SBAS Ranging, WAAS, EGNOS, MSAS and GAGAN
✓ Integrated 12 muti-tone active interference cancellers
✓ RTCM ready (RTCM v2.3 and v3.3)
✓ Indoor and Outdoor multi-path detection and compensation
✓ 132 tracking channels
Pin No.
Signal name
I/O
Description
20
STATUS
O
Module status
18
FLIGHT_MODE
I
Module flight mode (W_DISABLE)