10.3 Safety and Precautions
In order to use the wireless device safely, the terminal device informs the user of the relevant safety
information:
✓ Interference: When the use of wireless devices is prohibited or the use of the device may cause
interference and security of the electronic device, turn off the wireless device. Because the terminal will
send and receive RF signals when it is powered on. It can interfere with TV, radio, computer or other
electrical equipment.
✓ Medical equipment: In medical and health care facilities where the use of wireless devices is prohibited
in the express text, please follow the regulations of the site and turn off the device. Some wireless
devices may interfere with the medical device, causing the medical device to malfunction or cause
errors. If interference occurs, turn off the wireless device and consult a physician.
✓ Flammable and explosive areas: In flammable and explosive areas, please turn off your wireless device
and follow the relevant label instructions to avoid an explosion or fire. For example; gas stations, fuel
zones, chemical products areas, chemical transportation and storage facilities, areas with explosion
hazard signs, areas with “turn off radio equipment” signs, etc.
✓ Traffic Safety: Please comply with local laws or regulations in your country or region regarding the use
of wireless devices when driving a vehicle.
✓ Aviation Safety: When flying, please follow the airline's regulations and regulations regarding the use
of wireless devices. Before taking off, turn off the wireless device to prevent wireless signals from
interfering with aircraft control signals.
✓ Environmental Protection: Please comply with local laws regarding the handling of equipment
packaging materials, equipment or accessories, and support recycling operations.
✓ Emergency call: This device uses wireless signals for propagation. Therefore, there is no guarantee that
the network can be connected in all situations, so in an emergency this wireless device cannot be used
as the only contact method.
To Previous Page
Loading...
