Cavli Wireless C16QS - Page 8

8
www.cavliwireless.com
C16QS Hardware Manual
2.2
GNSS Performance parameters updated
15/02/2023
2.3
Updated table 2-1 and 5-1 with new Temperature values
Changed the reset reference circuit (Fig 6)
20/02/2023
2.4
Power Consumption characteristics (Table 5-6) updated
07/03/2023
2.5
AP_READY description updated
10/03/2023
2.6
Power supply information updated (Section 3.3.3)
03/04/2023
2.7
Tx Idle Current Consumption added
10/04/2023
2.8
NET_STATUS Pins updated
18/04/2023
2.9
Net_Status Pin description updated
24/04/2023
3.0
UART 1 Baud Rate updated
10/05/2023
3.1
Updated GNSS and UART interface
Changed pin layout
15/06/2023
3.2
Updated new variants (A.N., L.N., W.W.)
11/07/2023
3.3
Updated uSIM and USB reference circuits
12/07/2023
3.4
UART details updated, Device Driver information added, IN
variant added, ordering information updated
31/07/2023
3.5
Added CE EU Conformity Statement
04/08/2023
3.6
Updated Functional Block diagram
24/08/2023
3.7
Changed pin layout, Bottom view to Top view
31/08/2023
3.8
Updated information related to USIM interface
05/09/2023
3.9
Updated GNSS VRTC input figure
06/09/2023
4.0
Updated Warnings and GNSS Interface note
07/09/2023
4.1
Updated Optimal Working Temperature
Added FCC warnings and IC Information
18/09/2023