Need help?Do you have a question about the Ceetec IP250 and is the answer not in the manual?
User must have common knowledge of machines and read the manual.
Machine is for wood preservation/paint, not washing/cleaning.
Use necessary safety equipment like gloves, eye protection, safety shoes.
Wear appropriate work clothing with sleeves ending at wrists.
Ensure machine is stopped, empty, and power disconnected before work.
Safety screens must not be overridden or removed.
Ensure all safety features are functional and work area is clean.
Company details: Ceetec A/S, address, contact information.
Machine type, designation, and type number.
Maximum item dimensions and minimum item length.
Details on forward drive speed, pump capacity, motor connections, power.
Specifies the machine's own weight.
Noise level information and hearing protector recommendation.
Mechanical mounting must be finished before electrical start.
Machine must be lifted with a forklift truck, ensure balance.
Secure against tipping, empty of liquid, move on wheels or forklift.
Machine must be set up on an even and stable foundation.
Ensure sufficient space around the machine for safety.
Electrical connection must be done by a licensed electrician.
Disconnect power and disassemble/dispose according to national rules.
Place on firm surface, lock wheels, connect electricity.
Mount filter bag adapter, place container and suction hose.
Procedure for handling shutdowns and errors.
Read paint manual, check temperature, use in ventilated areas, avoid hazards.
Wire emergency stop at each end stops machine, brushes, and drive.
Individual setting and test run before continuous operation.
Setting guides and rollers for optimal item handling and brush contact.
Nozzle placement and adjustment for wood protection amount.
Setting brush pressure and ensuring screens are in place.
Adjusting the back-pressure roller for item feed.
Procedures for removing side plate and opening lids, safety switch function.
Dismounting and cleaning brushes and other components.
Cleaning the machine with water or cleaning agent, including nozzle system.
General checks and lubrication frequency.
Checking and lubricating bearings using external nipples.
Procedure for tensioning the belt for the motor and feed roller.
Procedure for tensioning the belt for the forward drive.
Procedure for tensioning belts for vertical brushes.
Checking belts for horizontal brushes, spring tension system.
Lubrication frequency and type for guides and spindles.
Keeping motors clean and maintaining gear/pump according to supplier.
Checking hoses for leaks and replacing if necessary.
Procedure for replacing the toothed belt for the motor and feed roller.
Procedure for replacing the toothed belt for the forward drive.
Procedure for replacing the toothed belt for vertical brushes.
Procedure for replacing the toothed belt for horizontal brushes.
Visual identification of spare parts labeled 'A'.
Visual identification of spare parts labeled 'B'.
Visual identification of spare parts labeled 'C'.
Visual identification of spare parts labeled 'D'.
Visual identification of spare parts labeled 'E'.
Visual identification of spare parts for the pump assembly.
General| Brand | Ceetec |
|---|---|
| Model | IP250 |
| Category | Paint Sprayer |
| Language | English |
To Next Page