Page 7 of 45
5 Description of the machine
Ceetec IP250 is made to treat wood with wood protection products (water and oil based). The machine can
be used for rough, planed and profiled wood.
The item is led by driving rollers past a set of nozzles which add an overdose of wood protection/paint to the
item. After this rotating brushes distribute and work in the wood protection in the item.
The forward drive speed and the brush speed are stepless adjustable, and the amount of wood
protection/paint can also be adjusted by opening/closing the nozzles.
The machine’s lid as well as the detachable side plate is equipped with safety switches which make sure the
machine will stop if the lids are opened. Note that operation of the pump continues even if these switches are
broken.
By taking off the detachable side plate there is easy access to the machine’s work area for cleaning, etc.
By taking off the side plate where the controls are mounted, fixed locking plate as well as the bottom
protective screening there will be easy access to the transmissions for cleaning, maintenance and repairs.
The painting machine is mounted on wheels and thus can be moved very easily.
As an accessory the painting machine can be delivered with a roller conveyor, a larger paint container as
well as a short-item guide for short items.
To Next Page
Loading...