Page 9 of 45
5.1 Mounting
The mechanical mounting must be finished before the electrical can be started.
Make sure the mounted screens mounted correctly and are in order. If the screens are not in place
there may be danger of personal injury in connection with moving/rotating parts.
5.2 Lift and handling
The machine must be lifted with a forklift truck. Points of attach on members on the frame are
marked with symbols. Do not lift in the motor, controls, shafts, etc.
Always make sure the unit/machine is balanced when lifting it. Never stand or walk underneath the machine
when it is being lifted.
5.3 Transport/moving the machine
During transport the machine must be secured against tipping over and against the weather.
Before the machine is moved it must be emptied of liquid/paint.
The machine can be moved on the mounted wheels. Alternatively with a forklift truck in the frame. See
section 5.2
When moving the machine manually it must be balanced. Never move the machine manually down a sloping
surface.
5.4 Setup
The machine must always be set up on an even and stable foundation.
5.5 Space requirements
During cleaning, repairs and maintenance there must be sufficient space around the machine. It must be
ensured that there is sufficient space to avoid the operator being struck by items leaving the machine.
5.6 Electrical connection
The electrical connection must only be carried out by a licensed electrician in accordance with current
national rules.
To Next Page
Loading...