Page 28 of 45
11.5 Motors, gear and pump
Motors: The motors must be kept clean and free from dust and paint residue. Any
grease, oil or similar products which may bind dust and subsequently reduce
the cooling effect must be removed.
The motor must be maintained in accordance with the supplier’s directions.
Gear (pump): (If the machine is equipped with a Ceetec membrane pump) Carry out monthly
checks of oil level on gear.
The gear must be maintained in accordance with the supplier’s directions.
Pump: (If the machine is equipped with a different pump than a Ceetec membrane
pump) The pump must be maintained in accordance with the subsupplier’s
directions.
11.6 Hoses
The hoses must be checked for leaks and replaced if necessary.
To Next Page
Loading...