Page 4 of 45
2 General terms of use
The machine may only be used for the purpose agreed in the order confirmation. If the machine is
used for other purposes, or if structural changes are made then Ceetec cannot guarantee the
safety of the machine and the warranty will be null and void.
The machine must not be set up in an area classified as having explosion danger.
Assembly, service, maintenance and repairs may only be performed by trained personnel with
knowledge of the machine and who have read the manual thoroughly! The electricity must be
disconnected and secured against re-energisation.
Protective devices and doors must not be overridden or dismounted; if this is done the user of the
machine takes full responsibility, and Ceetec disclaims liability for safety and the warranty on the
machine.
Only use original spare parts
3 Safety provisions
THE OPERATOR IS RESPONSIBLE FOR HIS OWN AND THE SAFETY OF OTHERS!
ROTATING PARTS! – SCREENING MUST BE CLOSED WHILE THE MACHINE IS IN
OPERATION!
3.1 Special training requirements
It is a prerequisite that the user has common knowledge of processing machines.
The user must be familiar with this instruction manual and must have read it thoroughly to familiarise himself
with the machine’s functions, before using the machine.
Furthermore, any operator must receive special instructions on how to use the machine.
3.2 Limitations to use
The machine may only be used for applying wood preservation/paint to wood articles and must not
be used as a washing and cleaning machine.
To Next Page
Loading...