ChamSys QuickQ - Chapter 7. Editing Cues; Editing Cues in a Cue Stack

Playing Back a Cue Stack
Selecting a playback by holding or double tapping on the cue stack preview above the fader
will display the cue list for that playback. Then the  button on the console can be used to run
the cues on the cue stack.
A running cue will have a green outline and a progress bar in the fade column.
Cue Name
will be empty when a cue is recorded and can be edited by selecting by holding or double
tapping.
34
QuickQ v6
2021-03-12